14″ Head Complete with Drive Block and Bearings (36″)
The Magnetic Preload System allows for the fast and efficient changing of any 3″ velcro-backed tooling on a standard 14″ pad driver. The system consists of a stainless steel ring that bolts to the pad driver and high density polymer tool holder rings with embedded magnets on one side and six recessed slots for 3″ velcro backed puck style tools on the other. Suited to a 36″ machine.
To change tools, simply pull off the polymer tool holder currently on the driver and slide a new, fully loaded polymer tool holder on. Alignment bosses on the stainless steel ring, with corresponding guide holes on the polymer rings make achieving a secure and proper placement automatic. Each setup comes with one stainless steel ring and two polymer tool holders, so you can always have your next step of tools loaded and ready to go.
Note: for use under an 8′ power trowel, you’ll need 10 of these set-ups – one for each of the 10 trowel arms. This is the COMPLETE unit needed for each trowel arm. This set-up includes the following 3 parts:
- Pork Chop and Bearing
- Driver Plate
- Magnetic Pre-load System (note: this includes an extra ring, as pictured)