Are you ‘edging’ your bets when it comes to edges?

concrete float

The Multiquip Whiteman CA4HC concrete float is the premier edging machine in the market. 

Edging of the concrete has caused many a retention in the past. One of the reasons for this is the lack of consistent finish around the edges of the slab due to hand trowel finish versus concrete float finish. What you need to achieve this is a specific edging concrete float which is where the CA4HC concrete float comes into its own.

In the past edging has been back-breaking work, on your hands and knees with a hand trowel. At Multiquip, as the UK’s leading concrete float specialists, we can offer an edging machine with characteristics not currently offered by the competition. So why do we champion this machine so much?

Currently, in the UK & Europe, the edging machine is designed to be a lightweight machine which can be loaded and off loaded by one person. At Multiquip, we design machines to do the job at hand not to suit what we can lift. This is the case with 95% of the edging machines on the market, they are designed with a low weight in mind for the hire industry. 

concrete float

The Multiquip CA4HC concrete float has a weight of 77kg. This is heavier than most but what does this mean in terms of operation? The weight distributed along the trowel arm is almost identical in PSI as a ride-on trowel. This results in a consistent finish right to the end of the slab, so there’s no need to then go over the edges with a hand trowel. The speed of the blades, combined with the weight, ensure no edge-of-the-slab curling or discolouration.

Two more additional features of the CA4HC machine are the profile and the rotating guard ring. The CA4HC is the lowest profile concrete float on the market and this means you can access all the hard to reach spots such as underneath purlins and also around obstructions. The rotating guard ring allows finishing tight to the wall without marking or marring.

concrete float

Why not give this concrete float a try? Time after time contractors come back to purchase this machine which is available in either Quick Pitch foldable handle or a standard handle.

If you would like to know more about our MQ Whiteman CA4HC concrete float or to arrange a demonstration, please do not hesitate to contact us.  You can call us on 0161 339 2223, you can also email us at sales@multiquip.co.uk or you can get in touch by using the online form that can be found on our Contact page.concrete float

Shopping Cart

Multiquip

Scroll to Top