MAGIC SCREED Honda GX35 Petrol/ E-SCREED CAS 36V Drive Only No Blade
Choose all options to enable add to cart.
Magic Screed: The Original Concrete Screed Since 1984
Since 1984, the Magic Screed has held its place as the leading name in concrete screed equipment. Contractors trust it because the vibrating blade delivers even distribution and better compaction across the full width of the pour, no matter how the concrete behaves or what size aggregate is in the mix.
View the Magic Screed Up Close
Why is This the Concrete Screed Tool of Choice?
Tools like these level and compact freshly poured concrete before the surface sets. Instead of dragging a straight edge across the slab by hand, the Magic Screed uses a powered vibrating blade to do the work faster and with far less strain on the user. The result is a flatter, denser concrete surface, with fewer voids and less risk of surface cracking later on.
While we’re talking about concrete screed tools here on this page, this article by our team might be some useful extra reading too. It’ll tell you more about what screed itself actually is, so if you’re unsure, it’s definitely worth a look!
How the Vibrating Blade Delivers Consistent Results
The blade on the Magic Screed vibrates along its entire length, which spreads the energy evenly rather than concentrating it in one spot. This matters because uneven vibration is what causes low spots, ridges, and inconsistent finishes on large pours.
Whether the concrete mix is fluid or stiff, and whatever size aggregate is going into it, the blade keeps compaction consistent from one end of the pour to the other. That consistency is a big part of why so many contractors call for a Magic Screed by name, rather than a generic screed board.
An anti-vibration system built into the handle also cuts down on the shake transferred to the operator's hands and arms. Less fatigue over a long shift also means better control late in the day, which is when small mistakes tend to creep in.
The Magic Screeds for Sale at Multiquip
Magic Screed Honda GX35 Petrol Power
The original Magic Screed design that set the standard, this tool uses a Honda GX35 petrol engine, and Honda's reputation for reliability is a large part of why this model has remained as the go-to standard for so long. It's quiet by petrol engine standards and runs on regular unleaded, so there's no mixing fuel or dealing with two-stroke smoke on site. The throttle handle also responds immediately to input, giving the operator precise control over blade speed as conditions change across the pour.
E-Screed: A Battery-Powered Tool for Cleaner Job Sites
If the original Magic Screed has one key drawback, it’s that petrol engines aren’t suitable for all jobs. Enclosed spaces, indoor pours, and sites with strict CO₂ limits all call for something quieter and emission-free, which is where the E-Screed comes in.
The E-Screed pairs Magic Screed's proven vibrating blade design with Metabo's 36V battery technology, giving crews the same compaction and finish quality without exhaust fumes or engine noise. It's built for greener sites without asking contractors to compromise on performance.
Metabo's cordless platform, as detailed on the official Metabo site, is known in the trade for holding power output under load, which is exactly what a screed blade needs to keep vibration consistent from the first pass to the last.
Magic Screed Parts and Blades for Every Application
The blades are the part of these screeding machines that bear the brunt of the wear. Magic Screed blades come in lengths from 4ft up to 16ft to match the width of whatever slab you're finishing. Running the correct blade length matters more than most operators realise, since an oversized or undersized blade changes how evenly the vibration reaches the edges of the pour.
Beyond the blades, the drive axle is another component worth keeping spare on larger jobs, since it takes the brunt of the mechanical load during long runs. Having the parts you need on hand rather than waiting on a delivery mid-job could be the difference between finishing on schedule and losing a day to downtime, but again, Multiquip has you covered here.
Choosing the Right Tool for You
Multiquip stocks both the petrol and battery-powered options, complete with blade, so contractors can pick the setup that fits their site conditions rather than settling for whatever's available. Buying the complete kit rather than the drive unit alone means you're ready to work the moment it arrives.
If you're weighing up petrol against battery power, or trying to figure out which blade length suits your typical pour size, get in touch with the team directly. You can contact Multiquip for current stock, pricing, and advice on matching the right screed to your project.
Petrol vs. Battery Power
The decision between petrol and battery power usually comes down to where you're working. Open sites with easy access to fuel may well favour the Honda-powered petrol model, while indoor pours, basements, and sites under emissions restrictions point toward the E-Screed.
Slab width also matters since it dictates blade length, as does mix design (how fluid the concrete is and what aggregate size is used) because it affects how much vibration the blade needs to deliver.
And for a wider look at our range of tools, material and equipment for concreting jobs, take a look at the concrete screeds and mixers category page.
Choose Multiquip for Magic Screed Products!
Whether you go with the Honda-powered petrol version or the Metabo-driven E-Screed, you're working with the same vibrating blade technology that's been setting the standard in concrete screed equipment since 1984. The choice really comes down to your site conditions, rather than a compromise in quality.
With genuine parts, both petrol and battery kits in stock, and a team that can talk you through blade sizing, Multiquip makes it straightforward to get the right tool for your job and site. Contact us today for help or advice!
FAQs
What kind of coverage performance will I get from the E-screed?
Exact performance figures for the E-screed will depend on slump and the prevailing conditions, but it’s possible to cover up to 5,000 ft2.
What makes the Magic Screed different from other screed boards?
The vibrating blade spreads compaction evenly across its full length, which is harder to achieve with a manual straight edge or a budget machine.
Can the E-Screed be used indoors?
Yes. It was built specifically for enclosed spaces and job sites with CO₂ restrictions, since it produces no exhaust emissions.
Where can I source Magic Screed parts like blades and drive axles?
Multiquip stocks blades from 4ft to 16ft, along with drive axles and other replacement components, so you can keep a working unit on site and avoid long delays and unnecessary downtime when a part needs to be replaced.
How do I decide between the petrol and battery models?
It depends on the site. Petrol suits open-air jobs with easy fuel access, while battery power suits enclosed or emissions-restricted environments. Check our general FAQ page for more on servicing, warranty, and delivery questions.
Related Products
No related products available.